Design Of A Power-Efficient Reconfigurable FFT Architecture Using Scaling-Free CORDIC And FlipFlop-Based Clock GatingID: 4033 Abstract :The Fast Fourier Transform (FFT) Is A Basic Building Block Of Digital Signal Processing, Yet Its Hardware Versions Are Costly In Power And Area Because Of Complex Multipliers And Always-running Clock Networks. This Paper Proposes An Adaptive Low-Power Reconfigurable FFT (ALPRFA) Architecture That Combines Scaling-free CORDIC (Coordinate Rotation Digital Computer) Computation With Flip-flop-based Clock Gating. The Scaling-free CORDIC Generates Twiddle Factors With Shift-and-add Operations Only, With No Explicit Multiplier And No Scaling Stage. Clock Gating Switches Off Idle Sequential Elements, Which Lowers Dynamic Power. The Design Is Written In Verilog HDL And Implemented On An Artix-7 FPGA For 4-, 8- And 16-point Transforms. Compared With Conventional Designs, It Reduces Power By 25.4%, 34.1% And 28.8%, Respectively, At An Unchanged Delay And An Area Overhead Of A Single LUT. |
Published:09-11-2026 Issue:Vol. 26 No. 11 (2026) Page Nos:95-99 Section:Articles License:This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. How to CiteAkkidasari Rohith Lokesh Dath, M. Lavanya, Design of a Power-Efficient Reconfigurable FFT Architecture Using Scaling-Free CORDIC and FlipFlop-Based Clock Gating , 2026, International Journal of Engineering Sciences and Advanced Technology, 26(11), Page 95-99, ISSN No: 2250-3676. |